This integration for Chargesplit Domus Series will let you integrate your wallbox inside Home Assistant as a custom component.
Based on the original work by @msx8020. All credit for the initial integration goes to them.
- WB132H
- WB332P
- WB332HS
- WB132HS
- WB132PRY
- WB332PRY
Installation is easiest via the Home Assistant Community Store (HACS), which is the best place to get third-party integrations for Home Assistant. Once you have HACS set up, simply click the button below (requires My Homeassistant configured) or follow the instructions for adding a custom repository and then the integration will be available to install like any other.
- Go in SETTINGS -> DEVICE AND SERVICES -> click on ADD INTEGRATION
- Search now for CHARGESPLIT DOMUS
- When prompted for SERIAL and SECRET code insert and click submit
- You will now find in device your wallbox
- Polling time is limited to 60 Seconds
- You need to wait 1 minute after sending commands to see updates
- A single station is manageable per HA installation
- Single current transformer models (WB132H / WB332H /WB332P) will show same value in Home and Solar consumption as it's not possible to determine where current transformer has been installed. WB-132S with 2 current sensors has not this limitation
WHERE DO I FIND MY SECRET CODE?
To get your secret code please email to support@chargesplit.com indicating your wallbox serial. Secret code will then be integrated into app