____  ____  _____      ____  _____ ___  _   _ ___ ____ ___ _____ _____ ____
|  _ \|  _ \| ____|    |  _ \| ____/ _ \| | | |_ _/ ___|_ _|_   _| ____/ ___|
| |_) | |_) |  _| _____| |_) |  _|| | | | | | || |\___ \| |  | | |  _| \___ \
|  __/|  _ <| |__|_____|  _ <| |__| |_| | |_| || | ___) | |  | | | |___ ___) |
|_|   |_| \_\_____|    |_| \_\_____\__\_\\___/|___|____/___| |_| |_____|____/ #1

----------------------------------------------------------------------------
		OS SUPPORT: Ubuntu 20.04.1 LTS \n \l - Server / Raspberry Pi 4
			[ by: ARI3L | rVn | y2k ] #arlington STAFF
----------------------------------------------------------------------------
HOT NEWS: 10/2020: Read about our VM called PayasOS :) 
https://github.com/GNUWorldChannel/PayasOS-20.04.1
REVIEW: y2k - ARI3L
----------------------------------------------------------------------------

#1 - Update OS and change Host.  (root) 

	 NOTE: READ CSERVICE WEB section FIRST. (IF YOU WANT WEB interface working.)
	 
	 NOTE: After change Hostname need to reboot the machine.
	 NOTE: Need to set a subdomain on the server for make it work well.
	 NOTE: Need a Static local IPV4 Need to check: (netplan or network/interface)
	 NOTE: New system like ubuntu 20.04 work with netplan.
	 NOTE: (Linux MINT incompatible)
	 NOTE: This Config is only on IPv4 if you dont have a IPV6 Tunnel config.
------------------------------------------------------------------------------
	 
	root@ircd:~# apt-get clean all 
	root@ircd:~# apt-get clean metadata 
	root@ircd:~# apt-get update 
	root@ircd:~# apt-get install -y systemd nano
	root@ircd:~# hostnamectl set-hostname irc.undernet.org
	
	PLEASE NOTE: when we say "irc.undernet.org" means your host name.	
	NOTE: You can use hostnamectl. if you change with. /etc/hostname need to change /etc/hosts too.
	NOTE: You need to set your hostname and save file. Crt + X + Y + Intro
	
	root@ircd:~# nano /etc/hostname
	irc.undernet.org
	
	root@ircd:~# nano /etc/hosts
	127.0.0.1 irc.undernet.org
	
	root@ircd:~# reboot
	
	
#2 - Install (byacc, flex, screen, make, cmake, zip, perl, automake, git, wget, 
	 ufw, net-tools, mlocate, gcc, oidentd, libpqxx-dev, tcl-dev, build-essential)
	
	root@ircd:~# apt-get install -y byacc flex screen make cmake zip perl automake git wget ufw net-tools mlocate gcc oidentd libpqxx-dev tcl-dev build-essential
	
	
#3 - How To Configure Firewall with UFW 
	 NOTE: FIRST NEED TO OPEN PORTS. NO ACTIVATE THE FIREWALL.
	 NOTE: Port need: 6667 to 7000 , 4400 , 113 , 53 , 443 , 80 , 22 , 25 , 110
	 NOTE: If you are running Secure SSL Smtp o a TLS. Dont need to open port 25(normal smtp). 
	 NOTE: (Port: 465 Secure SMTP) (Port: 587 TLS SMTP )
	 NOTE: You are open port 22 SSHD. Because right now is on default. if you change config on /etc/ssh/sshd_config ( #Port 22 )
	 Need to put the same port or SSHD ssh user@domain not going to work.
	 
	----------------------- 
	- Check UFW Status:
	-----------------------
	root@ircd:~# ufw status
	Status: inactive
	root@ircd:~#
	-----------------------
	- How to open a single port: IPV4 / IPV6 TCP
	-----------------------
	root@ircd:~# ufw allow 4400
	Rules updated
	Rules updated (v6)
	
	NOTE: How to Open a TCP / UDP Port.
	NOTE: Only TCP.
	NOTE: Only UDP.
	NOTE: TCP + UDP.
	NOTE: Deny access on TCP or UDP.
	NOTE: RECOMENDATION open TCP + UDP.
	
	root@ircd:~# ufw allow 25/tcp
	root@ircd:~# ufw allow 25/udp
	root@ircd:~# ufw allow 25
	
	root@ircd:~# ufw deny 25/tcp
	root@ircd:~# ufw deny 25/udp
	
	NOTE: Open a port rank. 6667 to 7000
	
	NOTE: this open TCP + UDP.
	root@ircd:~# ufw allow 6667:7000 
	
	NOTE: you can only open TCP
	root@ircd:~# ufw allow 6667:7000/tcp
	
	NOTE: you can only open UDP
	root@ircd:~# ufw allow 6667:7000/udp
	
	-----------------------
	- How to activate UFW (Ubuntu FireWall)
	  NOTE: NEED to open all port. DONT activate if you not got all ports open include SSHD.
	-----------------------
	NOTE: If you got set the open port for SSHD. Just say Y = (YES)
	
	root@ircd:~# ufw enable
	Command may disrupt existing ssh connections. Proceed with operation (y|n)?  
	Firewall is active and enabled on system startup
	root@ircd:~#
	-----------------------
	NOTE: If you dont have the UFE activate not going to Show PORTS OPEN.
	NOTE: Now we check if all the port are correct open.
	
	root@ircd:~# ufw status
	Status: active

	To                         Action      From
	--                         ------      ----

	4400                       ALLOW       Anywhere
	22                         ALLOW       Anywhere
	53                         ALLOW       Anywhere
	113                        ALLOW       Anywhere
	110                        ALLOW       Anywhere
	25                         ALLOW       Anywhere
	443                        ALLOW       Anywhere
	80                         ALLOW       Anywhere
	6667                       ALLOW       Anywhere 
    	
	4400 (v6)                  ALLOW       Anywhere (v6)
	22 (v6)                    ALLOW       Anywhere (v6)
	53 (v6)                    ALLOW       Anywhere (v6)
	113 (v6)                   ALLOW       Anywhere (v6)
	110 (v6)                   ALLOW       Anywhere (v6)
	25 (v6)                    ALLOW       Anywhere (v6)
	443 (v6)                   ALLOW       Anywhere (v6)
	80 (v6)                    ALLOW       Anywhere (v6)
        6667 (v6)                  ALLOW       Anywhere (v6)  
	root@ircd:~#
	NOTE: IPV4 on top. IPV6 on (v6)
	-----------------------
	
	NOTE: NOW we going to work with network or netplan for make a Local Static Ipv4 IP.
	NOTE: You need to have your Local IP. Some like 192.168.1.150 (Make sure because this change. 192.168.0.150 and so...)
	NOTE: You need to have the Gateway some like: 192.168.1.1 (Make sure because this change. 192.168.0.1 and so...)
	NOTE: You need to check if  you are running on 10.0.0.1
	
	-----------------------
#4 - Running oidentd and make sure the port is open!

	root@ircd:~# service oidentd start
	root@ircd:~#
	
	NOTE: Check if the oidentd is working well!
	
	root@ircd:~# ps aux | grep oidentd
	oident     10035  0.0  0.0   5252  2188 ?        Ss   May20   0:00 /usr/sbin/oidentd -S -mf -l 10 -u oident -g oident -P 192.168.1.1
	root      125101  0.0  0.0   6432   736 pts/0    S+   14:46   0:00 grep --color=auto oidentd
	root@ircd:~#
	
	NOTE: Make sure you do the correct setting on UFW and open the port 113.
	
	root@ircd:~# lsof -i :113
	COMMAND   PID   USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
	oidentd 10035 oident    4u  IPv4  34614      0t0  TCP *:auth (LISTEN)
	oidentd 10035 oident    5u  IPv6  34615      0t0  TCP *:auth (LISTEN)
	root@ircd:~#
	
#5 - Make sure you know all info about your IP / Netmask.

	 NOTE: All ifconfig can change. Not going to show the same result!
	 NOTE: inet 192.168.1.171 <-- Is your IP.
	
	 root@ircd:~# ifconfig
	enp0s3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.171  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::a00:27ff:fe51:9fc6  prefixlen 64  scopeid 0x20<link>
        ether 08:00:27:51:9f:c6  txqueuelen 1000  (Ethernet)
        RX packets 1743179  bytes 387461465 (387.4 MB)
        RX errors 0  dropped 26  overruns 0  frame 0
        TX packets 1133358  bytes 924588260 (924.5 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

	lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 189668  bytes 62354281 (62.3 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 189668  bytes 62354281 (62.3 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

	 root@ircd:~#
	 ---------------------------------
	 root@ircd:~# ifconfig | grep inet
	 inet 192.168.1.171  netmask 255.255.255.0  broadcast 192.168.1.255
	 inet6 fe80::a00:27ff:fe51:9fc6  prefixlen 64  scopeid 0x20<link>
	 inet 127.0.0.1  netmask 255.0.0.0
	 inet6 ::1  prefixlen 128  scopeid 0x10<host>
	 root@ircd:~#
	 ---------------------------------
	 root@ircd:~# ifconfig | grep ether
	 ether 08:00:27:51:9f:c6  txqueuelen 1000  (Ethernet)
	 root@ircd:~#
	 ---------------------------------
	 root@ircd:~# ip route show
	 default via 192.168.1.1 dev enp0s3 proto dhcp src 192.168.1.171 metric 100
	 192.168.1.0/24 dev enp0s3 proto kernel scope link src 192.168.1.171
	 192.168.1.1 dev enp0s3 proto dhcp scope link src 192.168.1.171 metric 100
	 root@ircd:~#
	 ---------------------------------
	 root@ircd:~# ip route show | grep default
	 default via 192.168.1.1 dev enp0s3 proto dhcp src 192.168.1.171 metric 100
	 root@ircd:~#
	 ---------------------------------
	 root@ircd:~# ip route show | grep default | awk {'print $3'}
	 192.168.1.1
	 root@ircd:~#
	 
-------------------------------------------------------------------------------------------

       _                ____
      (_)_ __ ___ _   _|___ \
      | | '__/ __| | | | __) |
      | | | | (__| |_| |/ __/
  The |_|_|  \___|\__,_|_____| Guide #2
------------------------------------------------------------
OS SUPPORT: Ubuntu 20.04.1 LTS \n \l - Server / Raspberry Pi 4
              [ by: ARI3L | rVn | y2k ]
------------------------------------------------------------
	
#1 - Add user GNUWORLD. + Password ask.

	root@ircd:~# adduser gnuworld
	
#2 - Enter in GNUWORLD USER
	
	root@ircd:~# su - gnuworld
	gnuworld@ircd:~$ pwd
	/home/gnuworld <-- We are in gnuworld user home folder.
	gnuworld@ircd:~$
	
#3 - Clone ircu2 from Github.

	gnuworld@ircd:~$ git clone https://github.com/UndernetIRC/ircu2.git
	gnuworld@ircd:~$ cd ircu2/
	gnuworld@ircd:~/ircu2 chmod +x configure
	gnuworld@ircd:~/ircu2 ./configure --help (SEE the help for all config. This is a basic setup.)
	gnuworld@ircd:~/ircu2 ./configure --prefix=$HOME --with-maxcon=1024  NOTE:( Maximum number of connections server will accept. --with-maxcon=1024 )	
	
	Note if you have Raspberry pi 4 use this flag ./configure --build=unknown-unknown-linux --prefix=$HOME --with-maxcon=1024
	
	gnuworld@ircd:~/ircu2 make
	gnuworld@ircd:~/ircu2 make install

#4 - Config Files for IRCD.
	 NOTE: Need to edit ircd.conf so you can run ircd.

	gnuworld@ircd:~/ircu2$ cd ..
	gnuworld@ircd:~$ ls
	bin  ircu2  lib
	----------------------
	gnuworld@ircd:~$ cd lib
	gnuworld@ircd:~/lib$ ls 
	example.conf
	----------------------
	gnuworld@ircd:~/lib$ cp example.conf ircd.conf
	gnuworld@ircd:~/lib$ echo "Hello World" > ircd.motd
	----------------------
	gnuworld@ircd:~/lib$ ls
	example.conf  ircd.conf  ircd.motd
	----------------------
	gnuworld@ircd:~/lib$ cd ..
	----------------------
	gnuworld@ircd:~$ ls
	bin  ircu2  lib
	----------------------
	gnuworld@ircd:~$ cd bin
	----------------------
	gnuworld@ircd:~/bin$ ls	
	convert-conf  ircd  ircd.202005201207  umkpasswd
	----------------------
	gnuworld@ircd:~/bin$ ./ircd
	gnuworld@ircd:~/bin$
	----------------------
	gnuworld@ircd:~/bin$ ps x
	PID TTY      STAT   TIME COMMAND
	10459 ?        Ss     0:00 ./ircd   <-- Is running!! :)
	10482 pts/0    R+     0:00 ps x
	gnuworld@ircd:~/bin$
	---------------------
#5 - Now we can go to mIRC. 
	
	/server ServerName:Port
	/server IP:Port
	
-------------------------------------------------------------------------------------------

       ____ _   _ _   ___        __    _         _
      / ___| \ | | | | \ \      / /__ | |_ __ __| |
     | |  _|  \| | | | |\ \ /\ / / _ \| | '__/ _` |
     | |_| | |\  | |_| | \ V  V / (_) | | | | (_| |
 The  \____|_| \_|\___/   \_/\_/ \___/|_|_|  \__,_| Guide #3
------------------------------------------------------------
OS SUPPORT: Ubuntu 20.04.1 LTS \n \l - Server / Raspberry Pi 4
		[ by: ARI3L | rVn | y2k ]
------------------------------------------------------------

#1 - Prepare the system by installing the necessary components. (tcl-dev, net-tools, libpqxx-dev)

	 root@ircd:~# apt-get install tcl-dev net-tools libpqxx-dev mlocate

#2 - Check if you have TCL installed.
		
	 root@ircd:~# /usr/bin/updatedb
	 root@ircd:~# locate tclConfig.sh
	 /root/tcl8.4.13-src/unix/tclConfig.sh
	 /root/tcl8.4.13-src/unix/tclConfig.sh.in
	 /root/tcl8.4.13-src/win/tclConfig.sh.in
	 /usr/lib/tclConfig.sh
	 /usr/lib/tcl8.6/tclConfig.sh
	 /usr/lib/x86_64-linux-gnu/tclConfig.sh
	 /usr/lib/x86_64-linux-gnu/tcl8.6/tclConfig.sh
	 /usr/local/lib/tclConfig.sh
	 root@ircd:~#

#3 - If you dont got install TCL this is the next step.
	 NOTE: You got install tcl-dev on pre-requisites, but dont jump this step!!

	 root@ircd:~# git clone https://github.com/Shadowss/tcl8.4.13-src
	 root@ircd:~# cd tcl8.4.13-src/unix/	
	 root@ircd:~/tcl8.4.13-src/unix# chmod +x configure
	 root@ircd:~/tcl8.4.13-src/unix# ./configure
	 root@ircd:~/tcl8.4.13-src/unix# make
	 root@ircd:~/tcl8.4.13-src/unix# make install
	 root@ircd:~/tcl8.4.13-src/unix# cd ..
	 root@ircd:~/tcl8.4.13-src# cd ..
	 root@ircd:~# ln -s /usr/local/lib/tclConfig.sh/usr/lib
	 
#4 - Install POSTGRESQL for sql manipulation.
	 NOTE: we dont recoment apt-get install : SO PLEASE! DONT!
	 
	 root@ircd:~# wget https://coder-com.universalnet.org/packages/postgresql-10.2.tar.gz
	 root@ircd:~# tar -zxvf postgresql-10.2.tar.gz
	 root@ircd:~# cd postgresql-10.2/
	 root@ircd:~/postgresql-10.2#
	 root@ircd:~/postgresql-10.2# chmod +x configure
	 root@ircd:~/postgresql-10.2# ./configure --with-CXX --enable-multibyte --with-tclconfig=/usr/lib --without-tk --without-readline --without-zlib
	 root@ircd:~/postgresql-10.2# make
	 root@ircd:~/postgresql-10.2# make install
	 root@ircd:~/postgresql-10.2# nano /etc/ld.so.conf
	 root@ircd:~/postgresql-10.2# cd
	 root@ircd:~#

	 NOTE: In this file you need to add this line: 			/usr/local/pgsql/lib
	 NOTE: Remember to save file. Crt + X , Y + Intro
	 
#5 - Install PGTCL1.5
	 
	 root@ircd:~# git clone https://github.com/Shadowss/pgtcl1.5.git
	 root@ircd:~# cd pgtcl1.5
	 root@ircd:~/pgtcl1.5# export PG_CONFIG=/usr/local/pgsql/bin/pg_config
	 root@ircd:~/pgtcl1.5#
	 root@ircd:~/pgtcl1.5# chmod +x configure
	 root@ircd:~/pgtcl1.5# ./configure --enable-modules=ccontrol,cservice,openchanfix --with-pgsql-home=/usr/local/pgsql --with-extra-includes=/usr/include/postgresql/
	 root@ircd:~/pgtcl1.5# make
	 root@ircd:~/pgtcl1.5# cd generic/
	 root@ircd:~/pgtcl1.5/generic# nano pgtclAppInit.c
	 
	 NOTE: This file only need to edit the <> on this part: <libpgtcl.h> change to "libpgtcl.h"
	 NOTE: Remember to save file. Crt + X , Y + Intro
	 
	 NOTE: This script got a TRICK!! going to show a Error with:
	 /usr/bin/install: cannot stat `./doc/*.n': No such file or directory

	 NOTE: So make sure you create first! for this error dont display!
	 NOTE: Some people like to use touch or mkdir, but we recoment nano with the next trick!! :)
	 
	 root@ircd:~/pgtcl1.5/generic# cd ..
	 root@ircd:~/pgtcl1.5# nano ./doc/*.n
	 
	 NOTE: nano ./doc/*.n   (Inside that file, just write a [A] and erase all!! make sure the file is empty.
	 NOTE: Close Editor and going to ask for save! say YES)
	 NOTE: Remember to save file. Crt + X , Y + Intro
	 
	 root@ircd:~/pgtcl1.5# make pgtclsh
	 root@ircd:~/pgtcl1.5# make install
	 root@ircd:~/pgtcl1.5# mv pgtclsh /usr/local/pgsql/bin
	 root@ircd:~/pgtcl1.5# mv libpgtcl1.5.so /usr/local/pgsql/lib
	 root@ircd:~/pgtcl1.5# updatedb
	 root@ircd:~/pgtcl1.5# ldconfig
	 root@ircd:~/pgtcl1.5# /usr/local/pgsql/bin/pgtclsh
	 
	 NOTE: This going to show some like: 
	 %
	 NOTE: Crt + C and close. (This is all good!)
	 
#6 - Now we are going to crate DATABASE !
	 
	 root@ircd:~/pgtcl1.5# cd ..
	 root@ircd:~# mkdir /usr/local/pgsql/data
	 root@ircd:~# chown gnuworld.gnuworld /usr/local/pgsql/data
	 root@ircd:~# su - gnuworld
	 gnuworld@ircd:~$ 
	 gnuworld@ircd:~$ /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
	 
	 NOTE: In some case the script going to show you the command for start!!
	 NOTE: If this is not correct! and the script dont show msg command: /usr/local/pgsql/bin/postmaster -B 64 -N 32 -i -D /usr/local/pgsql/data -o -F -h 127.0.0.1 >/dev/null 2>&1 &
	 
	 CHECK NOTES!! For this --> gnuworld@ircd:~$ /usr/local/pgsql/bin/postmaster -B 64 -N 32 -i -D /usr/local/pgsql/data -o -F -h 127.0.0.1 >/dev/null 2>&1 &
	 NOTE: Now we got the pgsql system running and working perfect!
	 NOTE: If sql start all good!! Exit!
	 
	 gnuworld@ircd:~$ exit
	 root@ircd:~#
	 root@ircd:~# ls /usr/include/postgresql/libpq-fe.h
	 root@ircd:~#
	 
	 
#7 - Now We going to download the GNUWorld!
	
	 root@ircd:~#
	 root@ircd:~# su - gnuworld
	 gnuworld@ircd:~$ 
	 gnuworld@ircd:~$ git clone https://github.com/UndernetIRC/gnuworld.git
	 gnuworld@ircd:~$ cd gnuworld/
	 gnuworld@ircd:~/gnuworld$ 
	 gnuworld@ircd:~/gnuworld$ pwd
	 
	 /home/gnuworld/gnuworld 		<-- We are in the GNUWORLD folder! Inside the gnuworld USER.
	 
	 gnuworld@ircd:~/gnuworld$
	 gnuworld@ircd:~/gnuworld$ chmod +x configure 
	 gnuworld@ircd:~/gnuworld$ ./configure --enable-modules=ccontrol,cservice,openchanfix --with-pgsql-home=/usr/local/pgsql --with-extra-includes=/usr/include/postgresql/
	 
	 NOTE: For Raspberry pi4 use this: ./configure --build=unknown-unknown-linux --enable-modules=ccontrol,cservice,openchanfix --with-pgsql-home=/usr/local/pgsql --with-extra-includes=/usr/include/postgresql/

	 gnuworld@ircd:~/gnuworld$ cd mod.cservice
	 gnuworld@ircd:~/gnuworld/mod.cservice$
	 
         nano cservice_config.h
         (we will enable features and change some config.)
          change: #undef USE_NEWPASS by #define USE_NEWPASS 
	  change: #undef ALLOW_HELLO by #define ALLOW_HELLO 
          change: #define IPR_DEFAULT_REJECT by #undef IPR_DEFAULT_REJECT
         NOTE: Those are mandatory if you won´t install cservice site. Once modified you save it CTRL+O & X) 
         
	 gnuworld@ircd:~/gnuworld/mod.cservice$ cd ..
	 gnuworld@ircd:~/gnuworld$ 		<-- We are here again.
	 
	 gnuworld@ircd:~/gnuworld$ make
	 gnuworld@ircd:~/gnuworld$ make install
	 
	 NOTE: NOW we going to create SQL and import .sql files inside the database!
	 NOTE: In this step we still in the dir: /home/gnuworld/gnuworld NOW going to enter in the same dir in DOC directory.
	 
	 gnuworld@ircd:~/gnuworld$ cd doc/
	 gnuworld@ircd:~/gnuworld/doc$
	 
	 gnuworld@ircd:~/gnuworld/doc$ pwd
	 /home/gnuworld/gnuworld/doc
	 
	 gnuworld@ircd:~/gnuworld/doc$

	 NOTE: Have to create STEP BY STEP!! or not going to work!
	 NOTE: Some people like to edit the cservice.addme.sql for a New user (Admin + md5 password.)
	 NOTE: If you stay in the default version you are going to login with: 
	 
	 User: Admin
	 Pass: temPass
	 
	 NOTE: You can edit this info or not!
	 NOTE: If you edit. cservice.addme.sql User and change from Admin to custom user. 
	 You have to edit. chanfix.addme.sql, cservice.addme.sql, ccontrol.addme.sql
	 (Use nano):  nano chanfix.addme.sql
	 (Use nano):  nano cservice.addme.sql
	 (Use nano):  nano ccontrol.addme.sql
	 
	 NOTE: Create CSERVICE SQL.
	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/createdb --template=template0 -E=SQL_ASCII cservice

	 NOTE: Import .sql Files in DB.
	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql cservice < cservice.sql  
 	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql cservice < cservice.config.sql  
 	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql cservice < languages.sql  
 	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql cservice < language_table.sql  
 	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql cservice < greeting.sql  
 	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql cservice < cservice.help.sql  
	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql cservice < cservice.web.sql  
 	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql cservice < cservice.addme.sql 

	 NOTE: Create Cservice WEB SQL.
	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/createdb local_db
	 
	 NOTE: Import .sql Files in DB. 
	 /usr/local/pgsql/bin/psql local_db < local_db.sql
	 
	 NOTE: Create CCONTROL SQL.
	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/createdb --template=template0 -E=SQL_ASCII ccontrol
	 
	 NOTE: Import .sql Files in DB. 	 
	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql ccontrol < ccontrol.sql  
 	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql ccontrol < ccontrol.help.sql  
 	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql ccontrol < ccontrol.addme.sql  
  	 gnuworld@ircd:~/gnuworld/doc$ /usr/local/pgsql/bin/psql ccontrol < ccontrol.commands.sql
	 
	 
	 NOTE: Now we going to move to other directory url.
	 
	 gnuworld@ircd:~/gnuworld/doc$ cd ../mod.openchanfix/doc/
	 gnuworld@ircd:~/gnuworld/mod.openchanfix/doc$ pwd
	 
	 /home/gnuworld/gnuworld/mod.openchanfix/doc	<-- NOTE: We are in this directory now! Make sure is the same!
	 
	 gnuworld@ircd:~/gnuworld/mod.openchanfix/doc$
	 gnuworld@ircd:~/gnuworld/mod.openchanfix/doc$ /usr/local/pgsql/bin/createdb chanfix
	 gnuworld@ircd:~/gnuworld/mod.openchanfix/doc$ /usr/local/pgsql/bin/psql chanfix < chanfix.sql  
	 gnuworld@ircd:~/gnuworld/mod.openchanfix/doc$ /usr/local/pgsql/bin/psql chanfix < chanfix.languages.sql
	 gnuworld@ircd:~/gnuworld/mod.openchanfix/doc$ /usr/local/pgsql/bin/psql chanfix < chanfix.language.english.sql  
	 gnuworld@ircd:~/gnuworld/mod.openchanfix/doc$ /usr/local/pgsql/bin/psql chanfix < chanfix.help.sql  
	 gnuworld@ircd:~/gnuworld/mod.openchanfix/doc$ /usr/local/pgsql/bin/psql chanfix < chanfix.addme.sql
	 
	 NOTE: NOW we got all SQL DB + .sql Imported in db.
	 NOTE: NOW we need edit the file: GNUWorld.example.conf cservice.example.conf and ccontrol.example.conf
	 NOTE: NOW recoment to make a copy for each file.
	 
	 NOTE: If you remember the las import was in /mod.openchanfix/doc so we move to new dir. 
	 make sure you do this! STEP by STEP!
	 
	 NOTE: use cd ../../bin is the same for cd .. cd .. cd bin
	 we just move back 2 directory and join in bin directory
	 
	 gnuworld@ircd:~/gnuworld/mod.openchanfix/doc$ cd ../../bin
	 gnuworld@ircd:~/gnuworld/bin$ pwd
	 
	 /home/gnuworld/gnuworld/bin	<-- We are here now!
	 
	 gnuworld@ircd:~/gnuworld/bin$
	 
	 NOTE: Remember to EDITE: GNUWorld.example.conf cservice.example.conf and ccontrol.example.conf
	 
	 NOTE: Make a copy for edit.
	 gnuworld@ircd:~/gnuworld/bin$ cp GNUWorld.example.conf GNUWorld.conf
	 gnuworld@ircd:~/gnuworld/bin$ cp cservice.example.conf cservice.conf
	 gnuworld@ircd:~/gnuworld/bin$ cp ccontrol.example.conf ccontrol.conf
	 
	 NOTE: If you dont edit this 3 files. GNUWorld is not goint to work or do nothing.
	 
	 NOTE: Now we just run GNUWORLD.
	 
	 gnuworld@ircd:~/gnuworld/bin$ ./gnuworld -f GNUWorld.conf
	 
	 NOTE: If all config was good!! you going to see the X in the channel you set etc...!
	 
	 For login to X type next command : 
	 /msg [email protected] login Admin temPass
	 /msg [email protected] newpass PASSWORD
	
	 
	 NOTE: if you login and all go OK! you ill see this msg from X or the name you select!
	 
	 -X- AUTHENTICATION SUCCESSFULL AS Admin!
	 NOTE: services.undernet.org is a domain! 
	 (if you change this in the .conf file make sure you put your own domain).
	 

      ____                     _             __        __   _
     / ___|___  ___ _ ____   _(_) ___ ___    \ \      / /__| |__
    | |   / __|/ _ \ '__\ \ / / |/ __/ _ \____\ \ /\ / / _ \ '_ \
    | |___\__ \  __/ |   \ V /| | (_|  __/_____\ V  V /  __/ |_) |
 The \____|___/\___|_|    \_/ |_|\___\___|      \_/\_/ \___|_.__/ Guide #4

--------------------------------------------------------------------------
		Test OS: Ubuntu 20.04.1 LTS \n \l - Server
			[ by: ARI3L | rVn | y2k ]
--------------------------------------------------------------------------
Pay attention to the following: If any cservice-web module does not respond 
or gives you problems, you should ask the official Undernet network coders,
because we can only help you install the site, but never modify the code that they wrote.
--------------------------------------------------------------------------
#1. Prepare the system by installing the necessary components.

	root@ircd:~# apt install apache2 apache2-bin apache2-data apache2-dev apache2-doc apache2-ssl-dev apache2-utils libapache2-mod-php 
        php7.4 php7.4-cgi php7.4-cli php7.4-common php7.4-curl php7.4-dev php7.4-gd php7.4-json php7.4-mysql php7.4-pgsql php7.4-readline
	php7.4-sqlite3 php7.4-xml php7.4-xmlrpc libreadline-dev libssl-dev openssl zlib1g zlib1g-dev
	root@ircd:~# updatedb	
	root@ircd:~#  nano /etc/php/7.4/apache2/php.ini 
	NOW: Go to the line 187 and change short_open_tag (from Off to On)
	Save the file CTRL+O

	root@ircd:~# service apache2 restart

	root@ircd:~# curl -sS https://getcomposer.org/installer | php && mv composer.phar /usr/local/bin/composer

#2. Now We going to download the GNUWorld cservice-web part!
	
	 root@ircd:~#
	 root@ircd:~# su - gnuworld
	 gnuworld@ircd:~$ 
	 gnuworld@ircd:~$ git clone https://github.com/UndernetIRC/cservice-web/
	 gnuworld@ircd:~$ cd cservice-web
	 gnuworld@ircd:~/gnuworld/cservice-web$ composer install
	 gnuworld@ircd:~/gnuworld/cservice-web$ cd php_includes
	 gnuworld@ircd:~/gnuworld/cservice-web/php_includes$ cp config.inc.dist config.inc
	 EDIT: cp config.inc.dist config.inc (With your own values)
	 
	 gnuworld@ircd:~/gnuworld/cservice-web/php_includes$ cd ..
	 gnuworld@ircd:~/gnuworld/cservice-web/ cd ..
	 gnuworld@ircd:~/gnuworld$

#3. Now we back to root user, for some user permission.
	 
	 gnuworld@ircd:~/gnuworld$ su
	 root@ircd:~# cd /var/www/html/
         root@ircd:/var/www/html# 
         root@ircd:/var/www/html# chmod 711 ~gnuworld
  	 root@ircd:/var/www/html# chmod 711 ~gnuworld/cservice-web
  	 root@ircd:/var/www/html# chmod 755 ~gnuworld/cservice-web/php_includes
  	 root@ircd:/var/www/html# chmod 644 ~gnuworld/cservice-web/php_includes/config.inc
  	 root@ircd:/var/www/html# chmod 755 ~gnuworld/cservice-web/docs/gnuworld/
  	 root@ircd:/var/www/html# ln -s /home/gnuworld/cservice-web/docs/gnuworld 
 	 root@ircd:/var/www/html# cd ..
  	 root@ircd:/var/www# cd ..
   	 root@ircd:/var# cd ..
   	 root@ircd~# 
	
	 root@ircd~# cd /etc/apache2/sites-enabled
 	 root@ircd~# nano 000-default.conf
         (check the correct shortcut there where is located cservice-web.)
        
#4. We back again into gnuworld user		 	 
         
     root@ircd:~# cd
	 root@ircd:~# su - gnuworld
	 gnuworld@ircd:~/gnuworld$ cd /gnuworld/cservice-web/php_includes
	 gnuworld@ircd:~/gnuworld/cservice-web/php_includes$
	 
	 NOW: nano ipr.sql 
	 Write your own ip. We show you as an example the first entry if you are trying to access locally.
	 insert into ip_restrict (id, user_id, added_by, added, type, expiry, value) values (1, 1, 1, now()::abstime::int4, 1, 0, '192.168.1.0/24');
	 Save the file with (CTRL+O)
	 
	 With the gnuworld running, perform:
	 gnuworld@ircd:~/gnuworld/cservice-web/php_includes$ /usr/local/pgsql/bin/psql -h 127.0.0.1 cservice < ipr.sql 
	 
	 NOW you are able to login into cservice-web with Admin + temPass if you didn´t change it with the ip provided.
	 You can add more ips from user edit via web, so no need to add another one.
	 
	 That´s all :)
	 REVIEW: y2k - ARI3L