I have compiled this patch on an Apple M4 arm64 engine and replaced into Arduino Ide 2. But I cannot load the sketch into the board neither I can erase (flash) the Arduino nanomatter . The problem is tha openocd tries to flash at address 0x08006000 and it is not correct ( it should be 0x08000000 ). Everythink looks fine in the cfg files .
I have compiled this patch on an Apple M4 arm64 engine and replaced into Arduino Ide 2. But I cannot load the sketch into the board neither I can erase (flash) the Arduino nanomatter . The problem is tha openocd tries to flash at address 0x08006000 and it is not correct ( it should be 0x08000000 ). Everythink looks fine in the cfg files .