Name		Name	Last commit message	Last commit date
parent directory ..
Horizontal for ESP32 (non S3) with white OBD2 connector board.zip		Horizontal for ESP32 (non S3) with white OBD2 connector board.zip
Horizontal for ESP32-S3 with white OBD2 connector board.zip		Horizontal for ESP32-S3 with white OBD2 connector board.zip
PCB 2.5.stl		PCB 2.5.stl
README.md		README.md
Thin small flat housing (for flat cable).zip		Thin small flat housing (for flat cable).zip
Vertical (for OBD2 connector without extra board).zip		Vertical (for OBD2 connector without extra board).zip

README.md

Housings

Three housings done so far:

Very thin very small and minimalist with wire going directly into the casing

"Horizontal" with integrated OBD2 connector. This is especially for some cars where a wider casing will prevent you from plugging it into the cars jack if the jack is slightly recessed.
I've also made a version with a slot for a built in SD card reader. Good for logging locally within the unit instead of over Bluetooth/Wifi/USB. This one is identical in size.

"Vertical" with integrated OBD2 connector. Flatter, doesn't stick out as long from the jack as the "Horizontal" version but is wider so will not fit in all cars.
I've also made a version of this one with a slot for a built in SD card reader. Good for logging locally within the unit instead of over Bluetooth/Wifi/USB. This one is slightly thicker.

With an OBD2 connector

Housing with an OBD2 connector so you can plug it in to the car directly.

"Horizontal"

M2 screws and inserts

"Vertical"

Add a beeper?

Minimalist small and flat